Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)
Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)
Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)
Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)
Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)
Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)
Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)
Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)

Bykski Full Coverage GPU Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)

$199.99 USD

LOW INVENTORY...ONLY LEFT IN STOCK

viewed this product in last hours
SKU: A-GV7900XTXGMOC-X
Availability: In stock, In Boise ID USA Pre order Out of stock
Order in the next [totalHours] hours %M minutes to get it between and
Add to Wishlist

Description

This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.

The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

Specifications
  • Block Material: Nickel Electroplated High Purity Copper / Acrylic
  • Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
  • (Including but not limited to the following models)
  • Compatible with GIGABYTE Radeon RX 7900 XTX GAMING OC
  • After narrowing your selection, Please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.
  • Compatibility based on these circuit board designs only
  • Fittings: G 1/4in. Thread
Parts Included
  • 1x Full Coverage GPU Water Block
  • 1x Backplate
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • Thermal grease
  • 1x 5v A-RGB (RBW) Light
  • (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings

This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.

The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.

Not responsible for any damage caused by or when using this product. Please use it at your own risk.

Reviews ⭐⭐⭐⭐⭐

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
B
Brennan G.
Good Quality - Great Temperatures!

Was pleasantly surprised to see the quality of the Waterblock! Works great. If you’re not familiar with waterblock installations it might be difficult for beginners due to little documentation, but works perfectly. Would buy again for future GPU’s.

A
Andrew E.G.
Awesome waterblock for my Gigabyte 7900XTX

Awesome waterblock! My only issue was the lack on installation instructions! I looked around online to find help and found a video on youtube showing how, but I'm not 100% comfortable that I did it exactly right since BySki didn't provide their own instructions. Aside from that, this thing rocks! My 7900XTX barely hits 50C under extended max load! Would definitely recommend!

Hey Andrew,
Thanks for the positive review! Printed instructions aren't provided for the wide variety of available GPU block models, but we do provide installation guides in the image gallery.

L
Lukáš B.
Water Block and Backplate For GIGABYTE Radeon RX 7900 XTX GAMING OC (A-GV7900XTXGMOC-X)

The water block works perfectly. no problem.

Thank you very much.

J
James H.
Exactly what I have been waiting for

This is a fantastic water block. All the big companies are lacking in 7900XTX support and these Gigabyte cards have custom PCB's. I have been waiting months for a water block to fit my card. This will also work on the RX 7900XT OC Gaming card as they share the same PCB. Thank you for supporting the less mainstream cards Bykski!

Returns Policy

To view our comprehensive and detailed return policy, please kindly use the link provided below. This link will direct you to all the necessary information regarding our procedures, guidelines, and requirements for returns. You will find everything you need to know about the return process, including eligibility criteria, timelines, and any specific conditions that may apply. Thank you for your understanding and cooperation in this matter. We appreciate your attention to this important information.

Return/Refunds and Restock Fees

Shipping Policy

To view the full details of our shipping policy, please follow the link below. It includes important information regarding delivery times, available shipping options, and order specifics. If you have any additional questions or require help, feel free to reach out to us. Thank you for taking the time to review our policies.

Shipping and Delivery Policies